Verifying indoor LED lighting for classrooms. Standard requirements, available instruments and new quality considerations

By Mikołaj Przybyła IES Member CIE Member| GL Optic  Proper lighting plays a key role in creating the right lighting conditions for learning and working in schools and other educational institutions, providing visual comfort, safety and energy efficiency. However, it is not enough to replace old luminaires with modern ones. What should be done to [...]

New Ecodesign Regulation on flicker and stroboscopic effect in LED lighting.

Flicker and Stroboscopic Visibility Measure (SVM) to be introduced by the revised Ecodesign Regulation for light sources by the end of 2019. Evaluation and measurements of optical flicker is a new task for electronic developers who provide solutions for LED lighting applications. When new drivers, power supplies or dimming electronics is purchased or designed, engineers [...]

How to organize a modern photometric laboratory Part 3 – introduction to luminance measuring devices

Luminance is the most important quantity in lighting design and the most important measure in road lighting and architectural illumination. It is also the measure that is probably the easiest to understand and notice by the user, because it determines the “brightness” of the observed objects and surfaces. The 21st century, revolutionized by the widely [...]

How to organize a modern photometric laboratory Part 2 – selection of an integrating sphere system

An integrating spheres are one of the basic instruments for measuring light sources, lamps and luminaires. Traditionally, an integrating sphere is also called an Ulbricht sphere, and its name comes from the name of German engineer Richard Ulbricht, who during the preparation of electrification and lighting of a railway station dealt with photometric measurements in [...]

How to organize a modern photometric laboratory Part 1 – selecting a goniometer system

Many manufacturers of lighting products use external measurement laboratories to verify compliance with standards and assess performance. Some manufacturers or importers rely solely on their suppliers' datasheets and try to avoid having to carry out measurements on their own. This situation is quite common not only among small start-ups but also larger lighting companies in [...]

Modern Lighting Audits. Technology supporting designers and contractors to verify lighting conditions

Available lighting design software tools support architects, engineers, and designers with the calculation and simulation of luminance levels and even correlated color temperature (CCT), but little is available for on-site verification tools. Nevertheless, verification can insure conformance for specific application requirements such as detailed task-work, food inspection, color critical viewing, warehouse isles, safety exit signs, [...]

Light for colour evaluation in printing and graphic arts industries

Visual evaluation of colours in printing and graphic arts industries is of key importance for the process of colour management and verification of print quality. In order to properly assess colour, it is necessary to ensure proper lighting conditions, as described in ISO 3664:2009 standard. Despite the fact that almost 10 years have passed since [...]

Spectrometer adds dimension to goniometric characterization of SSL lamps and luminaires

While photodetectors have long been used alongside goniometers to characterize light sources, PASI MANNINEN and MIKOLAJ PRZYBYLA explain that a GONIO-SPECTROMETER system enables collection of a more robust set of parametric data for LED-based products. Published on Sep 3, 2015 in LEDs MAGAZINE by Mikolaj Przybyla COO at GL Optic and Pasi Maninen a goniometric systems [...]

White LED light sources – quality and colorimetric characteristics

Optical radiation in the visible range, primarily white light with correlated colour temperature ranging from 3000 to 6500 K, can be emitted by electroluminescence diodes available in different technologies. For this reasons LED modules, integrated LED lamps and LED luminaries differ with respect to the quantity and quality of emitted radiation. Reliable measurements and comparisons [...]

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top